Autel IM508 IM608 BMW G-Series BDC02 Add Key Using Tips

 

Dear Autel Customers:

Recently, some customers have experienced module damage when performing add key functions on BMW G chassis BDC02 using Autel IM508/ IM608.

Here are Precautions for BMW BDC02 Function and Reasons that may lead to module damage:

 

1.Failure to strictly follow the operation guide and connection instructions – Incorrect wiring or not adhering to the step-by-step procedure can result in module or chip burnout. Please carefully read and follow the operation guide and procedure prompts.

 

2.Neglecting electrostatic precautions – Static electricity in the working environment can damage the module or chip. It is strongly recommended to wear an anti-static wrist strap throughout the entire process.

 

3.Incorrect grounding of the EEPROM PIN2 – The PIN2 of the EEPROM module must be connected to the specified ground line as shown in the diagram. Using any other ground connection may result in chip damage.

Read Also:

http://blog.cardiagtool.co.uk/autel-im508-im608-support-bmw-g-chassis-bdc-add-key/

http://blog.cardiagtool.co.uk/autel-im508-im608-bmw-g-series-bdc02-add-key-using-tips/