Bridge K1 K2 on LAUNCH XPROG-3 MCU Adapter for Mercedes W212 AKL?

 

Question:

All key lost on Mercedes, need to solder K1 to K2 on back?

Mercedes W212

I have MCU3 Adapter, XPROG3 Programmer, and LAUNCH X431 IMMO PLUS.

Answer:

No need for a bridge, connect xprog to the tablet with usb and the necessary supplies to the Y obd cable and enter immo prog, Mercedes Benz, anti-theft password reading then select the car model w212 then the wire diagram and from there you can manage, the diagram tells you exactly what joints to do and what type you have to use cable! Notice that you need the EIS contact of the car that is put down because it is made on the bench for faster password reading!

Feedback:

All done.

No Soldering K1 K2 together, try without soldering and working.

All key lost Mercedes C class 2012 w204 - EIS.W207

*A bridge is not required for Kline, but other EIS like W639 may need a jumper wire on the two sides

 

Done! Hope this helps!

http://blog.cardiagtool.co.uk/bridge-k1-k2-on-launch-xprog-3-mcu-adapter-for-mercedes-w212-akl/

评论

此博客中的热门博文

VNCI PT3G vs. OEM PT3G vs. Custom VAS 6154A vs. Other PT3G

ECU Tuning Tool Comparison: KESS3, Flex, FoxFlash, CGDI...

Alitentech Kess3, FLEX, Autotuner: Which is Better?