Program Used Ford Fusion PCM ECM using VNCI VCM3

 

Here we have a used Ford Fusion PCM ECM to program using VNCI VCM3 with GODIAG Cables.

GODIAG Cables will fit in multiple works.

Check out all pins and connect module to VCM3.

Run IDS.

We are going to change and program VIN.

Run VNCI Device Manager.

If the manager won't respond, Unplug and plug the VCI.

Always update VNCI firmware.

Select

Start New session>>All other

Keep PCM away from Internet and timeout, that's what we want.

Skip all notes until the VIN info screen.

Enter the Vin to be programmed into used PCM.

Now we need to enter tear tag number.

Go to website "www.motorcraftservice.com".

Search for tear tag by a VIN number.

Enter odometer.

Enter Solenoid Body Strategy which is on transmission module.

Download required files from the server.

Enter ECM info.

Wait for programming to be done.

If we program it for a replacement, we need to do parameter reset now.

Select

Toolbox>>Body>>Security>>PATS Functions

Wait for the 10-minute process and we could do parameter reset to sync used ECM.

Done! VNCI VCM3 Scanner works well with Ford IDS to program used PCM ECM.

http://blog.cardiagtool.co.uk/program-used-ford-fusion-pcm-ecm-using-vnci-vcm3/