Alientech KESS3 V2.05 Add DTC Feature

 

Alientech KESS3 V2.05 update is available now!

The new “DTC" feature of KESS3 allows you to view and reset DTCs in a car or motorcycle.

Through the EOBD connection of KESS3, Alientech Suite retrieves the list of (SAE - Society Automotive Engineers) error codes recorded during vehicle operation, helping mechanics and mechatronics easily identify potential faults and damages.

The DTC feature is now available with an active KESS3 Subscription.

WHAT ARE THE KEY POINTS OF THE NEW DTC FEATURE?

• DETECTION AND INTERPRETATION OF ERROR CODES
• RESETTING ERROR CODES
• PRE-TUNING AND POST-TUNING DIAGNOSTICS
• SPECIAL FUNCTIONS

Detection and Interpretation of DTCs

*When connected to the control unit, KESS3 obtains the stored error codes.

The tool sends commands to the control unit to receive a detailed list of the DTCS present, quickly identifying the vehicle's problems without the use of additional devices. This feature centralizes the diagnostic process, reducing the time needed to identify faults and increasing work effciency.

Resetting DTCs

*After identifying the codes, it is possible to reset them, thereby eliminating warning lights

and anomalies on the dashboard.

Clearing the fault is essential for ensuring the proper functioning of the vehicle. After performing mechanical repairs, this KESS3 feature allows for a DTC reset, ensuring comprehensive service.

Pre-Tuning and Post-Tuning Diagnostics

*Assessment of risks and feasibility of modifcations.

This feature allows you to preview and interpret error codes to prevent faults or malfunctions in the vehicle. Additionally, the same process can be performed after modifying the engine parameters with KESS3. In this case, the DTC feature helps identify any error codes that could appear after the tuning phase.

Special Functions

*Special functions dedicated to specific vehicle models.

Some special functions such as steering alignment, differential lock/unlock, or resizing of wheel dimensions are available for some vehicle models. These specific functions are included in the "DTC" feature package and expand the range of modification and customization interventions.

Stay tuned!

http://blog.cardiagtool.co.uk/alientech-kess3-v2-05-add-dtc-feature/