How OBDSTAR DC706 Clone JEEP Continental GPEC2?
In this article, we will show you how to clone JEEP Continental GPEC2 using OBDSTAR DC706 with MP001 Adapter.
Step-by-step Instructions:
Turn on DC706,
Select
ECU Flasher>>ECM>>ECM V30.70
Search for "GPEC2".
Select "JEEP CONTINENTAL GPEC2 MPC5566+95320".
Select Boot mode and MP001 Adapter.
Carefully read "Guide" before operation.
1)If you use P003/ P003+, an 120ohm resistor is required
2)If you use MP001, no more resistors are required
Check out "PINOUT".
Solder cables and connect tools as required.
Connect ECU.
Read EEPROM.
Read Flash.
Write EEPROM and Flash.
Done! That's how OBDSTAR DC706 Tool read write GPEC2.
http://blog.cardiagtool.co.uk/how-obdstar-dc706-clone-jeep-continental-gpec2/
评论
发表评论