How to Solve Autel AP200 "VCI not connected" Error?

 

Quick Question:

Autel AP200 Scanner, it pairs with the phone but does not connect to vci. My iphone works well but android 14 fails. AP200 app just got stuck on that screen.

how-to-solve-autel-ap200-vci-not-connected-error-1

how-to-solve-autel-ap200-vci-not-connected-error-2

Also tried to cancel vci connection, pairs ok but won't talk to the vci as in the photo above.


Here Cardiagtool engineer answers:

1.Make sure there are no other mobile phones around trying to connect to this VCI. It is best to disconnect all the ones you have connected and cancel the connection record of iphone

2.Is this iphone connected to other VCIs? If so, disconnect it first to avoid interference

3.Have you installed other Autel apps? If so, do not open them at the same time as they will interfere with each other

4.Try to click "Done"

how-to-solve-autel-ap200-vci-not-connected-error-3

Then Autel AP200 should work fine.


Done! Hope this could help!

http://blog.cardiagtool.co.uk/how-to-solve-autel-ap200-vci-not-connected-error/

评论

发表评论

此博客中的热门博文

Solved! Fetrotech Read Mercedes EDC16CP31 "S1 and S2 pinout error"

图片
  Question: EDC16CP31 doesn't work on Fetrotech Silver you have three tries with three different cars and all three don't work put X on MB 16cp31. 1-b class not work 2-e class not work 3-sprinter not work Here we have 3 different pinouts of EDC16CP31: PINOUT 1 (on Fetrotech ) PIN33 T96 - GPT0 PIN34 T96 - GPT1 PIN2 T58 - GND PIN5&41 T58 - +12V PIN43 T58 - KLINE PINOUT 2 PIN33 - GPT0 PIN77 - GPT1 PIN2- GND PIN5&41 - +12V PIN43 - KLINE PINOUT 3 PIN86 - GPT0 PIN77 - GPT1 PIN2- GND PIN5&41 - +12V PIN43 - KLINE Through tests, PINOUT2 works, and CAN-H/-L is not required. http://blog.cardiagtool.co.uk/solved-fetrotech-read-mercedes-edc16cp31-s1-and-s2-pinout-error
阅读全文

Free Download GODIAG J2534 Cable Driver and Software

图片
  GODIAG J2534 Cable , compatible with J2534 Passthru and ELM327, can work with HDS, TIS, JLR SDD, PCMflash, FORSCAN... Free Download GODIAG J2534 Software from Cardiagtool : GODIAG J2534 Driver VAG ODIS 9.10 Toyota 17.00.00/17.20.013 HDS HONDA 3.104.024 JLR SDD 163 Forscan 2.3.48 Scanmaster v2.1 PCMflash (*Install GODIAG J2534 driver first) How to Install Software?     Test with JLR SDD V163: To install driver, run "GODIAG DriverSetup_vc_xc86_1v0". Connect GODIAG VNCI to Land Rover Freelander 2 Open "JLR SDD". Go to Computer Management>>Device Manager>>Port (COM & LPT) Check if VCI is connected. Input VIN to enter. Go to Diagnosis>>Powertrain>>Engine system>>Engine cooling>>Coolant contamination View PCM DTC. http://blog.cardiagtool.co.uk/free-download-godiag-j2534-cable-driver-and-software/
阅读全文

Original FoxFlash Read MED9.1 on Bench Tips

图片
Question: MED9.1 on bench will not connect. Bench box with stable PSU, and tried all pinouts but FoxFlash Tool will not read ECU. Solution: Step 1. Disconnect BDM Adapter!! put 12V in FoxFlas h not bench box After that, both MED9.1 still fail. Step 2. Use correct cable to connect, the white cable with red stripes is J1708 cable. Feedback: My problem is fixed. The ECU connects. http://blog.cardiagtool.co.uk/solved-foxflash-fail-to-connect-med9-1-on-bench/  https://www.foxflash.co.uk/ 
阅读全文