Alientech Kess3 V1.95 Add Denso 112731-5040 and 33910-79JX/57KX

 

Alitentech KESS3 V1.95 upgrade is now available!

Remap and clone on bench the ECU Denso 112731-5040 and Denso 33910-79JX/57KX for Subaru and Suzuki are added.

Check out update info, all KESS3 with an active subscription will enjoy the update!

alientech-kess3-v1.95-add-denso-112731-5040-and-33910-79jx57kx-1

New ECUs:

  • Denso 112731-5040
  • Denso 33910-79JX/57KX


Denso 112731-5040

Subaru

-RD, WR and Clone in Bench Mode

Forester2.5i CVTPetrol127 kW
Legacy2.5i CVTPetrol127 kW
Outback2.5i CVTPetrol127 kW


Denso 33910-79JX/57KX

Suzuki

-RD, WR and Clone in Bench Mode

Grand Vitara1.6 16v VVT 5MTPetrol78 kW
Grand Vitara2.0 16v 5MTPetrol103 kW
Swift1.5Petrol75 kW
Swift Sport1.6 16v VVTPetrol92 kW
SX41.5 VVTPetrol73 kW
SX41.5 VVTPetrol82 kW
SX41.6 VVTPetrol79 kW
SX41.6 VVTPetrol88 kW
SX42.0 VVTPetrol105 kW

*Expand your customer portfolio and activate KESS3 CAR – BENCH/BOOT Protocols to intervene immediately on the new supported vehicles.


Stay tuned!

http://blog.cardiagtool.co.uk/alientech-kess3-v1-95-add-denso-112731-5040-and-33910-79jx57kx/

评论

发表评论

此博客中的热门博文

Solved! Fetrotech Read Mercedes EDC16CP31 "S1 and S2 pinout error"

图片
  Question: EDC16CP31 doesn't work on Fetrotech Silver you have three tries with three different cars and all three don't work put X on MB 16cp31. 1-b class not work 2-e class not work 3-sprinter not work Here we have 3 different pinouts of EDC16CP31: PINOUT 1 (on Fetrotech ) PIN33 T96 - GPT0 PIN34 T96 - GPT1 PIN2 T58 - GND PIN5&41 T58 - +12V PIN43 T58 - KLINE PINOUT 2 PIN33 - GPT0 PIN77 - GPT1 PIN2- GND PIN5&41 - +12V PIN43 - KLINE PINOUT 3 PIN86 - GPT0 PIN77 - GPT1 PIN2- GND PIN5&41 - +12V PIN43 - KLINE Through tests, PINOUT2 works, and CAN-H/-L is not required. http://blog.cardiagtool.co.uk/solved-fetrotech-read-mercedes-edc16cp31-s1-and-s2-pinout-error
阅读全文

Free Download GODIAG J2534 Cable Driver and Software

图片
  GODIAG J2534 Cable , compatible with J2534 Passthru and ELM327, can work with HDS, TIS, JLR SDD, PCMflash, FORSCAN... Free Download GODIAG J2534 Software from Cardiagtool : GODIAG J2534 Driver VAG ODIS 9.10 Toyota 17.00.00/17.20.013 HDS HONDA 3.104.024 JLR SDD 163 Forscan 2.3.48 Scanmaster v2.1 PCMflash (*Install GODIAG J2534 driver first) How to Install Software?     Test with JLR SDD V163: To install driver, run "GODIAG DriverSetup_vc_xc86_1v0". Connect GODIAG VNCI to Land Rover Freelander 2 Open "JLR SDD". Go to Computer Management>>Device Manager>>Port (COM & LPT) Check if VCI is connected. Input VIN to enter. Go to Diagnosis>>Powertrain>>Engine system>>Engine cooling>>Coolant contamination View PCM DTC. http://blog.cardiagtool.co.uk/free-download-godiag-j2534-cable-driver-and-software/
阅读全文

Original FoxFlash Read MED9.1 on Bench Tips

图片
Question: MED9.1 on bench will not connect. Bench box with stable PSU, and tried all pinouts but FoxFlash Tool will not read ECU. Solution: Step 1. Disconnect BDM Adapter!! put 12V in FoxFlas h not bench box After that, both MED9.1 still fail. Step 2. Use correct cable to connect, the white cable with red stripes is J1708 cable. Feedback: My problem is fixed. The ECU connects. http://blog.cardiagtool.co.uk/solved-foxflash-fail-to-connect-med9-1-on-bench/  https://www.foxflash.co.uk/ 
阅读全文