Xhorse Multi Prog Programmer Frequently Asked Questions

 

Recently Xhorse released their latest Multi Prog Programmer. It could read/ write ECU, TCU, and dashboard.

So, here we have collected FAQs from our customers, hope this could help you better understand this tool before you buy one.

xhorse-multi-prog-programmer-frequently-asked-questions-1

Q1.Is there life time free update? With multi prog?

A1.Yes, life-time free update.


Q2.What's the difference between vvdi prog and multi prog?

A2.Multi prog covers all functions of VVDI PROG, and it is added into TCU cloning functions.

xhorse-multi-prog-programmer-frequently-asked-questions-2

Q3.Can I transfer MQB license from my old vvdi prog to multiprog if I buy a new one?

A3.No need to transfer licenses, since all licenses on multi prog is already activated (including MQB48 License, Bench Read ISN License...). Just link your Multi Prog to VVDI2.


Q4.Is the checksum calculated automatically for ECUs?

A4.No, send modified files to Xhorse tech for checksum.


Q5.Can I use vvdi prog adapters on multi prog? Volvo adapter or MQB Adapter?

A5.No, vvdi prog adapters are not compatible with multi prog, but XDKP30 Adapter allows some to work on new multi prog.

xhorse-multi-prog-programmer-frequently-asked-questions-3

xhorse-multi-prog-programmer-frequently-asked-questions-4

Complete!

http://blog.cardiagtool.co.uk/xhorse-multi-prog-programmer-frequently-asked-questions/

评论

发表评论

此博客中的热门博文

Solved! Fetrotech Read Mercedes EDC16CP31 "S1 and S2 pinout error"

图片
  Question: EDC16CP31 doesn't work on Fetrotech Silver you have three tries with three different cars and all three don't work put X on MB 16cp31. 1-b class not work 2-e class not work 3-sprinter not work Here we have 3 different pinouts of EDC16CP31: PINOUT 1 (on Fetrotech ) PIN33 T96 - GPT0 PIN34 T96 - GPT1 PIN2 T58 - GND PIN5&41 T58 - +12V PIN43 T58 - KLINE PINOUT 2 PIN33 - GPT0 PIN77 - GPT1 PIN2- GND PIN5&41 - +12V PIN43 - KLINE PINOUT 3 PIN86 - GPT0 PIN77 - GPT1 PIN2- GND PIN5&41 - +12V PIN43 - KLINE Through tests, PINOUT2 works, and CAN-H/-L is not required. http://blog.cardiagtool.co.uk/solved-fetrotech-read-mercedes-edc16cp31-s1-and-s2-pinout-error
阅读全文

Free Download GODIAG J2534 Cable Driver and Software

图片
  GODIAG J2534 Cable , compatible with J2534 Passthru and ELM327, can work with HDS, TIS, JLR SDD, PCMflash, FORSCAN... Free Download GODIAG J2534 Software from Cardiagtool : GODIAG J2534 Driver VAG ODIS 9.10 Toyota 17.00.00/17.20.013 HDS HONDA 3.104.024 JLR SDD 163 Forscan 2.3.48 Scanmaster v2.1 PCMflash (*Install GODIAG J2534 driver first) How to Install Software?     Test with JLR SDD V163: To install driver, run "GODIAG DriverSetup_vc_xc86_1v0". Connect GODIAG VNCI to Land Rover Freelander 2 Open "JLR SDD". Go to Computer Management>>Device Manager>>Port (COM & LPT) Check if VCI is connected. Input VIN to enter. Go to Diagnosis>>Powertrain>>Engine system>>Engine cooling>>Coolant contamination View PCM DTC. http://blog.cardiagtool.co.uk/free-download-godiag-j2534-cable-driver-and-software/
阅读全文

Original FoxFlash Read MED9.1 on Bench Tips

图片
Question: MED9.1 on bench will not connect. Bench box with stable PSU, and tried all pinouts but FoxFlash Tool will not read ECU. Solution: Step 1. Disconnect BDM Adapter!! put 12V in FoxFlas h not bench box After that, both MED9.1 still fail. Step 2. Use correct cable to connect, the white cable with red stripes is J1708 cable. Feedback: My problem is fixed. The ECU connects. http://blog.cardiagtool.co.uk/solved-foxflash-fail-to-connect-med9-1-on-bench/  https://www.foxflash.co.uk/ 
阅读全文