Solved! Can't Update Launch X431 IMMO Plus Firmware

 

One customer gave feedback that he could not update firmware for his X431 IMMO Plus Tablet. It said "Device no response, please retry".

solved-cant-update-launch-x431-immo-plus-firmware-1

solved-cant-update-launch-x431-immo-plus-firmware-2

Here Cardiagtool tech shares

Solution:

Connect IMMO Plus to X431 Key Programmer before firmware update.

solved-cant-update-launch-x431-immo-plus-firmware-3

http://blog.cardiagtool.co.uk/solved-cant-update-launch-x431-immo-plus-firmware/

评论

发表评论

此博客中的热门博文

Solved! Fetrotech Read Mercedes EDC16CP31 "S1 and S2 pinout error"

图片
  Question: EDC16CP31 doesn't work on Fetrotech Silver you have three tries with three different cars and all three don't work put X on MB 16cp31. 1-b class not work 2-e class not work 3-sprinter not work Here we have 3 different pinouts of EDC16CP31: PINOUT 1 (on Fetrotech ) PIN33 T96 - GPT0 PIN34 T96 - GPT1 PIN2 T58 - GND PIN5&41 T58 - +12V PIN43 T58 - KLINE PINOUT 2 PIN33 - GPT0 PIN77 - GPT1 PIN2- GND PIN5&41 - +12V PIN43 - KLINE PINOUT 3 PIN86 - GPT0 PIN77 - GPT1 PIN2- GND PIN5&41 - +12V PIN43 - KLINE Through tests, PINOUT2 works, and CAN-H/-L is not required. http://blog.cardiagtool.co.uk/solved-fetrotech-read-mercedes-edc16cp31-s1-and-s2-pinout-error
阅读全文

Free Download Toyota TIS Techstream V18.00.008 Software

图片
  V18.00.008 Toyota TIS Techstream is available now! Get free download link from Cardiagtool . Free Download Techstream Software: V18.00.008 Toyota Techstream Compatible Devices: Tactrix Openport 2.0 MVCI PRO J2534 Cable VXDIAG Toyota GODIAG J2534 Cable Simply Installation: Run "Techstream Setup V18.00.008 Autokent.exe" and wait until installation is complete. Language: English, French, Italian, Spanish, German, etc. More free software, please check: https://bit.ly/3AbeggQ http://blog.cardiagtool.co.uk/free-download-toyota-tis-techstream-v18-00-008-software/
阅读全文

How to Solve Autel XP400 PRO PC Suite "Disconnect P1"?

图片
  One customer asked what was wrong with his XP400 PRO Programmer connecting to his computer. The program prompted him to disconnect P1 pin, but what is the P1 pin and does XP400 PRO work alone? Here is the answer: 1.XP400 Pro Programmer could work alone, without Autel IM608 Pro Tablet (official website>>login in account>>download "PC Programmer") In this case, reinstalling program works. 2.Remove chips in programmer before connecting to computer Remove chips>>restart computer>>connect to 12v and computer>>open PC suite 3.Re-connect PIN P1 Reconnect Pin P1 before connecting to computer. Done! http://blog.cardiagtool.co.uk/can-autel-xp400-pro-programmer-work-alone-on-computer/
阅读全文