What Passthru J2534 Interface can Work with Renault CAN Clip?

 

Question:

What Passthru J2534 Interface can work with Renault CAN Clip? Don’t want to buy Renault CAN Clip V212, or need original clip interface source.


Generally, we need to trick Clip into believing your passthru (j2534) vci is an Alliance VI probe.

Try Can Clip V202, it is the best version so far


Possibly the simplest way:

Set "Vendor"="79B" and "Name"="1B" on your passthru registry settings in HKEY_LOCAL_MACHINE\SOFTWARE\PassThruSupport.04.04\<VCI>. I recommend creating a new vci entry by exporting from registry and editing the reg file.

I have used DrewTech Cardaq Plus, Ford VCM2, VAS5054 and Daf VCI. Communication with some ecus has glitches, but most work alright.

Renault has the multimedia CAN bus on OBD pins 12 and 13, so you most likely will not be able to access ecus on that bus, unless your vci is able to route a second CAN channel to those pins. If you really need access to that bus, you can make yourself an adapter cable and redirect the CAN pins by intercepting the passthru api calls.


OBD2 VCM2 - work fine but slow refreshing

Recommend can clip v202.

Checked on Renault Master 3 2017/2019 it works after OBD2 VCM2 but there is a slow refreshing .


It's sorted. I've updated firmware in VCM and it's working now.


This was working fine with my VCM2. worked well but, at times keeps disconnecting and hangs the clip application.

 

VXDIAG - Fail

Mod registry as the method on the top.

I have try with VXDIAG interface on Megane 2015, it detects the interface and also detect the car very fast, but after enter the network test the software crash,, something about CAN1, CAN2 etc error.

The error comes from AcqBoardJ2534Adapter.dll and it was on Clip 198


VXDiag supports Can / Can PS but does not support Can CH1 / Can CH2, the firmware is too old for Clip and the new RSN interface


VCX Nano will not work interface is limited by licensed


I have installed on VMware can clip V202.

I have tested mine with Bosch M-VCI, same as yours, just crashes on network scan, Hangs.

after many attempts it gets thru network scan , then crashes immediately. cannot work....

on Renault 2014



Scanmatik 2 - work quickly

Scanmatik 2 saves entries in the registry so I think it should work, I tried on the original passthr and it worked very quickly.


Worked flawlessly on scanmatik2 pro. also tested ok with autel j2534 with can clip v203 and reprog v191.


I used scanmatic didnt now it worked on renault can clip but eccidentialy it was pluged in i thought canclip was connected but was scanmatic and worked perfect.

Didn’t do any thing but driver for scanmatic was already on that laptop for Renault online modules it works great


Cardaq - work

I exported my cardaq registry entry from list of pass thru adapters and edited reg file in notepad.

Changed registry key name to "Renault Cardaq"

Changed vendor to "79B"

Changed name to "1B"

Then imported the new entry into registry.

I tried my Cardaq-M with this mod, and it worked. Like you said, it didn't pick up multimedia.


PCMtuner - goes good

Can Clip pass thru goes good. win10 work but on old xp can't run for now

what-passthru-j2534-interface-can-work-with-renault-can-clip-1

GM MDI2 - work but need to completely follow top instructions

GM MDI 2 Original does not work.


I have vcm2 clone, genuine vas5054, mini-vci j2534 (and can-clip clone probe that I have problem with). I try to make your solution working but no luck


Bosch MVCI - tested work

Should work, I have tested with Bosch MVCI.


Tactrix Open Port 2.0 - work

I managed to get it to work even without the car. It now works with my chinese Tactrix Open Port 2.0 J2534 cable.


Working fine with openport tactrix clone and v213 reprog v192 and working really good



VAS5054 - Work but need complete installation of VAS5054 Driver

VAS5054 is well detected with the tweak but I cannot dialog with my Megane 4. Checked voltages at Pin 6,14 and Pin 12, 13.


Cant get it to work with vas5054 with passthru rottary drivers


Try this Renault Clip VAS5054a PassThru Driver Windows 10 x64 (https://mhhauto.com/Thread-Please-Test-Renault-Clip-VAS5054a-PassThru-Driver-Windows-10-x64), for me working 100%.

What I did myself is:

1 35 gb new partition for windows

2 fresh windows 11 64 bit (can be windows 10/64 bit)

3 net framework 2.0(3.0,3.5 with)

4 winrar

5 driver for vas

6 clip install.


The clip does not see vas 5054a, try as above and it works.


Best and most economic interface for Can Clip?

Full Chip Renault Can Clip with Original chipset AN2135SC/AN2131QC,

Supports Diagnostics and Programming


http://blog.cardiagtool.co.uk/what-passthru-j2534-interface-can-work-with-renault-can-clip/

评论

发表评论

此博客中的热门博文

VNCI PT3G vs. OEM PT3G vs. Custom VAS 6154A vs. Other PT3G

图片
  New VNCI PT3G Porsche Diagnostic Scanner would be the best replacement for OEM PT3G. Here we will show you the differences between them. VNCI PT3G vs. OEM PT3G vs. Custom VAS 6154A vs. Other PT3G Function VNCI PT3G OEM PT3G Custom VAS 6154A Other PT3G Support original PIWIS driver √ √ × × Plug and play √ √ × × CANFD/ DOIP √ √ × √ Support Multi-version PIWIS √ √ Patch required Patch required KW71 Protocol (1995MY previous vehicles) √ √ × × Support Vehicles 1996-2023 1996-2023 Unknown 2005-2022 Firmware update for free √ √ × × VNCI PT3G Highlights: 1.Compatible with original PIWIS driver 2.Supports latest PIWIS software 3.Replace original Porsche diagnostic tool PT3G 4.Supports USB, WiFi and LAN connection 5.Multi-language: 23 languages, including German, English, Chinese, French, Italian, Spanish, Japanese, Polish, Portuguese, and Dutch 6.Support Porsche 9PA 9YA 9YB 92A 95B 918 970 971 981 982 986 987 991 992 996 997 Y1A and all Porsche models http://blog.cardiagtool.co.uk/vnc...
阅读全文

ECU Tuning Tool Comparison: KESS3, Flex, FoxFlash, CGDI...

图片
  In this article, we are introducing different ECU tuning tools for you. Check out their difference. 1. Alitentech Kess V3 Kess3 is from Alientech, it's an Italian company. They were doing Kess and Ktag. They have combined both tools and made it Kess3 with OBD/ Bench/ Boot mode. They are experts and manufacture ECU titanium the remapping software. 2.Flex Flex is from Magicsport company from Italy. It supports Bench and OBD. Coverage is massive and it has master/ salve version. 3.KT200 The new generation of KTM flashes. It is upgraded model of Gelito, and some say it is the Clone device for Atlantic. 4. PCMtuner Like KTM supporting 32 modules, it supports 67 modules. 200 Bosch ECU read and write protocols without opening the cover. Added 490 new protocols. It's very good for Japanese and Korean cars. 5. FC200 It is made by CGDI company. I can feel it is a clone from Flex but the clone more in Bosch controllers. So, if you work on BMW, this is the best tool for you because it i...
阅读全文

Alitentech Kess3, FLEX, Autotuner: Which is Better?

图片
  In this article, we are going to compare 3 main ECU programming tools: Alitentech Kess3 , FLEX, and Autotuner. Check out their pros and cons. 1.FLEX Start from Flex. The Magicmotorsport tool is separated into two, we have the interface to connect via OBD. The main advantage is that for people who know virtual reading Flex can update vehicle to another version of software when they don't find a virtual file. And it is capable of reproducing it, that is, we can access the vehicle even if the server doesn't have that virtual reading. Regarding Flex, it has some special motor units. All three are expensive tools. They all are with a case, everything, cables in it, but Flex in the brief cardboard box. 2. Kess3 The great advantage of Kess is the coverage while Flex and Autotuner support new vehicles. All 3 support new vehicles, but in terms of older vehicles of 10 to 12 years only Kess supports. Another advantage of Kess is that it has a GPS accelerometer, etc. In the future, ...
阅读全文