GODIAG OBD2 Jumper Cable Review: Full-protocol Cables

 

GODIAG OBD2 Jumper Cable is designed for replacing cables connecting different ECUs and devices via OBD2 way like MMPS, FGTECH, KESSV2, BYSHUT, DISPROG, etc.

godiag-obd2-jumper-cable-review-stronger-in-techs-hands-1


Functions:

  1. Supports DC power supply
  2. Support safety protection banana head super programming dedicated connection port power supply.
  3. Independent GND4, GND5 [for special ECU programming].
  4. With boot GND4 clip, compatible with programming equipment such as MPPS, FGTECH, KESSV2.
  5. With GND4 GND5 short-circuit switch [For ECUs needed to be switched to short-circuit mode when programming].

(Note: The switch of GND4-5 is normally pressed to make it light. When some ECUs need to be independently connected to GND4 and GND5, release the switch)

  1. Simulate ignition switch [equipped with 1 large and 2 small dedicated ignition cables].
  2. Support standard obd2 full protocol connection [double K line, double CAN line], 3 large and 2 small power plugs, 4 large GND, 4 small GND.
  3. Equipped with CAN protocol communication resistance.
  4. Breakout Tricore Cable
  5. Replace EIS/ELV Test Lines(Full package 74EUR), working with Xhorse, CGDI, IM608series products to read eis data for key matching.


Supported Ports:

godiag-obd2-jumper-cable-review-stronger-in-techs-hands-2

BMW 20

BENZ38

PSA-

DAIHATSU-4

FIAT-3

GAZ

NISSAN-14

SUZUKI-3

AUDI 4

BENZ 1

CHRYSLER 6

DAEWOO 12

FORD6+1

GM12

HONDA3

KIA20

MAZDA17

MITSUBISHI 12

SSANGYONG 20

SUBARU 9

TOYOTA 17

TOYOTA 22

BENZ 8

BENZ OD1 16


Connections to different devices:

With Xhorse Key Tool Plus,

godiag-obd2-jumper-cable-review-stronger-in-techs-hands-3

With FGTECH,

godiag-obd2-jumper-cable-review-stronger-in-techs-hands-4

With MPPS,

godiag-obd2-jumper-cable-review-stronger-in-techs-hands-5

With Kess V2,

godiag-obd2-jumper-cable-review-stronger-in-techs-hands-6


Our Tests:

1)Work with MPM to read Cadillac, 2.0L, L4 E67 Gen4

Video:


2)Work with MPM, GT105 for Chevy Engine ECU chip tuning

Video:


Customer Tests:

1)Work with VVDI MB to read W221 EIS.

(Need a 120ohm resistor between CAN-H & CAN-L, but double CAN line, very well)

godiag-obd2-jumper-cable-review-stronger-in-techs-hands-7

godiag-obd2-jumper-cable-review-stronger-in-techs-hands-8

2)Work with VVDI2 to read Audi Simos 6.2 6.3 Pin code and flash data.

godiag-obd2-jumper-cable-review-stronger-in-techs-hands-9

godiag-obd2-jumper-cable-review-stronger-in-techs-hands-10


http://blog.cardiagtool.co.uk/godiag-obd2-jumper-cable-review-stronger-in-techs-hands/

评论

此博客中的热门博文

VNCI PT3G vs. OEM PT3G vs. Custom VAS 6154A vs. Other PT3G

ECU Tuning Tool Comparison: KESS3, Flex, FoxFlash, CGDI...

Alitentech Kess3, FLEX, Autotuner: Which is Better?